PRODUCTS


CUSTOMER SUPPORT


TECHNICAL LIBRARY

Citations
Manuals
Tutorials

Join our mailing list!





          
You are here: Home > Habitest Modular System > Accessories for Behavior Systems
Choose a sub category:
Controllers Stimulators

AUXILIARY RELAY
Contact our Behavioral Research Specialists for more information

This is a 1-Form-C (Single-Pole, Double-Throw) relay that is operated by 5 or 28 volts from any Linc or other source. It may be used to control any device that may be controlled by a remote switch closure, or may be modified to do so. Use it to control projectors, event-mark data being gathered by another system, or to operate other stimuli which do not operate on 5 VDC or 28 VDC. If the device is operated 110 volts A.C., use the A29-19 below.

A 25-foot control cable is supplied with the controller.
AC DEVICE CONTROLLER, 150 WATT
Contact our Behavioral Research Specialists for more information

This is a solid state relay that may be controlled by either 28 VDC or 5 VDC signals from any Linc or other source. Use it to turn on line-powered lights, motors, etc. A 25-foot control cable is supplied with the controller.

This devices is available in two versions:
  • A29-19 -> DEVICE CONTROLLER, AC 150 WATT, 110V
  • A29-19-220 -> DEVICE CONTROLLER, AC 150 WATT, 220V
8-CHANNEL INVERTER
Contact our Behavioral Research Specialists for more information

The H91-23 Inverter Converter is used to convert any DC voltage signal from +/-3, to +/-30 volts to either +/-5, +/-12, or +/-24 volt signal at 300 mAmps per output. In addition, the H91-23 includes selectable debounce time constants of 1 millisecond, 10 milliseconds and 25 milliseconds for converting signals generated by switches that produce switch bounce so the output will only respond once to each input. The output voltage remains on for the duration that the corresponding input voltage is present. This device is extremely useful when interfacing the outputs of one system to the input of another system or when the output signals of a system do not provide enough current to drive an external device.

This devices is available in two versions:
  • H91-23 -> 8-CHANNEL INVERTER CONVERTER 110V
  • H91-23-220 -> 8-CHANNEL INVERTER CONVERTER 220V
TTL (5 TO 24 VOLT) CONVERTER
Contact our Behavioral Research Specialists for more information

The 5 Volt TTL to 24 Volt Converter is used to convert 5 Volt TTL signals from the computer or other 5 volt sources to 24 volts, providing enough current to operate stimulus devices such as visual cues, auditory cues, shockers, stimulators, and other stimuli. The BNC connector is attached to the 5 Volt signal source and the modular connector is used to provide the 24 volt output signal. A wall mount power supply is included with this product.

This devices is available in two versions:
  • H91-24 -> 5 VOLT TTL - 24 VOLT CONVERTER 110V
  • H91-24-220 -> 5 VOLT TTL - 24 VOLT CONVERTER 220V