Coulbourn Instruments | External Device Controllers

AC Device Controller, 150 WATT

Product Number: A29-19

This is a solid state relay that may be controlled by either 28 VDC or 5 VDC signals from any Linc or other source. Use it to turn on line-powered lights, motors, etc.

A 25-foot control cable is supplied with the controller.

Auxiliary Relay

Product Number: A29-18

This is a 1-Form-C (Single-Pole, Double-Throw) relay that is operated by 5 or 28 volts from any Linc or other source. It may be used to control any device that may be controlled by a remote switch closure, or may be modified to do so. Use it to control projectors, event-mark data being gathered by another system, or to operate other stimuli which do not operate on 5 VDC or 28 VDC. If the device is operated 110 volts A.C., use the A29-19 below.

A 25-foot control cable is supplied with the controller.

Habitest Linc Output Converter

Product Number: H03-14

The H03-14 Habitest™ Linc Output Converter provides 5 Volt TTL compatible outputs from a Habitest Linc (H02-01 and H02-08). The H03-14 converts the –28VDC outputs from the Habitest Lincs to standard 5 Volt, High True, TTL Logic. The H03-14 also passes the -28 Volt signals for simultaneously operating stimulus devices. A single Habitest Linc can support up to two of the H03-14, providing 28, 5 Volt TTL outputs.

This device is used for applications that require a 5 Volt TTL signal for operating auxiliary devices and for synchronizing time and stimulus onset/offset with other recording systems requiring 5 Volt TTL signal inputs being used simultaneously with Graphic State.

A 10-foot, 40-Pin IDC cable for interfacing the H03-14 to a Habitest Linc and a 10-foot, 26-Pin IDC cable for the 5 Volt TTL outputs are included.

TTL (5 to 24 Volt) Converter

Product Number: H91-24

The 5 Volt TTL to 24 Volt Converter is used to convert 5 Volt TTL signals from the computer or other 5 volt sources to 24 volts, providing enough current to operate stimulus devices such as visual cues, auditory cues, shockers, stimulators, and other stimuli. The BNC connector is attached to the 5 Volt signal source and the modular connector is used to provide the 24 volt output signal. A wall mount power supply is included with this product.