| |
|
Fixed Speed Infusion Pumps
|
Product Number: E73-01-3.3
The E73-01 Series pumps can accommodate from a 50cc syringe to a microliter syringe, both in plastic and in glass. Its unique size, its extreme durability, and its simplicity to operate, makes the E73-01 Series infusion pumps the instruments to use in clinical medicine and repetitive experimentation. Such diverse applications as flushing catheters, electrolyte therapy, drug testing, sucrose gradients and catalyst introduction are some of the hundreds of uses of this pump. Sterile syringes in sizes up to 50cc capacity are accepted. When properly filled, air or contamination cannot be introduced into the system.
No screws to unfasten, no tools are required. Squeezing the jaws will release the grip on the lead screw so that the slide assembly can be moved to the rear position. All critical parts are fabricated from stainless steel, and bronze bearings are lubricated for life. Thus a minimum of maintenance is required.
Other motor speeds are available upon request
|
|
| |
|
Programmable/Selectable Speed Infusion Pumps
|
Product Number: E73-02 & E73-05
The E73-02 & E73-05 can accommodate from a 50cc syringe to a microliter syringe, both in plastic and in glass. These models have a built in flow chart, calibrated for the Multifit brand syringe, with 99 equally spaced speeds from:
1.45 to 143.cc/hr with 50cc syringe
0.95 to 94.cc/hr with 30cc syringe
0.71 to 70.cc/hr with 20cc syringe
0.40 to 39.cc/hr with 10cc syringe
0.25 to 25.cc/hr with 5cc syringe
Eliminated are clogged valves and erroneously calibrated drip intervals. At a glance, one can easily determine the amount of fluid infused. The pump comes into contact with a sterile syringe, never the fluid, and when properly filled cannot introduce air into the patient. All critical parts are fabricated from stainless steel, and bronze bearings are lubricated for life. Thus a minimum of maintenance is required. |
|
| |
|
Quad Syringe Adapter
|
Product Number: E73-QUAD
No need to buy multiple pumps in order to simultaneously infuse on multiple syringes. Simply add this optional mounting bracket to your current Coulbourn infusion pump and accomodate up to four syringes. |
|
| |
|
Balance Arm for Arenas and Cages
|
Product Number: H29-01
The balance arm mounts on the ceiling of the modular test cage or hubs. They are used to carry electrode leads, catheters, swivels and commutators. The balance weight on the arm may be moved as a counterpoise and locked in place. The mounting holes in the mounting bracket of the balance arm aligns with holes on the ceilings of the test cages and hubs. Two thumbscrews are included with the balance arms for securing the balance arm to the ceiling of the test cage or hub. |
|
| |
|
Swivel
|
Product Number: A73-51
The swivel mounts on either the H29-01M or H29-01R support arm, both of which test cages with the IS option. Supplied with offset-arm, an Allen wrench, and screws to attach to the tether spring. |
|
| |
|
Catheter Protection Spring & Tether
|
Product Number: A73-59M & A73-59R
Attaches to the harness at one end and the swivel at the other. It transmits torque from the animal to the swivel and protects the cannula running through the center from chewing.
(Length- 24 inches) |
|
| |
|
Vests
|
Product Number: A71-21M-XX & A71-21R-XX
A71-21M-XX
The harnesses have holes to accommodate the rodent's legs and close with hooks. The tether spring attaches to the harness with Velcro®.
| P/N |
Description |
| A71-21M-<25 |
25 gm or under |
| A71-21M-25/30 |
25 to 30 gm |
| A71-21M->30 |
Over 30 gm |
A71-21R-XX
The harnesses have holes to accommodate the rodent's legs and close with hooks. The tether spring attaches to the harness with Velcro®.
| P/N |
Description |
| A71-21R-150/250 |
150 - 250 gm |
| A71-21R-250/300 |
250 - 300 gm |
| A71-21R-350/500 |
350 - 500 gm |
|
|
