PRODUCTS


CUSTOMER SUPPORT


TECHNICAL LIBRARY

Citations
Manuals
Tutorials

Join our mailing list!





          
You are here: Home > Habitest Modular System > Arenas > Isolation Cubicles

ISOLATION CUBICLE, WIDE (ID: 30" W X 17.75" D X 18.5" H)
ISOLATION CUBICLE, WIDE (ID: 30" W X 17.75" D X 18.5" H)
Contact our Behavioral Research Specialists for more information

The Cubicles are designed to isolate the subject from distracting ambient light, sound and laboratory activity. The H10-24 standard isolation model has very high-density, monolithic rigid foam walls. The cubicles are of sufficient size to hold a cage or hub with a full complement of stimulus-response modules and feeders. They will hold the longest modules (feeders and retractable levers or a nest/retreat box) on both end walls or a running wheel on one end of a rat test cage. It will also hold an octagon hub with feeders and retractable levers. The cubicle has two environment connection boards, ECBs, on the back wall for connecting the S-R modules and the Linc control cables. There is an exhaust fan in the center of the rear wall. The fan is powered by 28 volts from the control interface.

Dimensions:
Inside Dimensions: 30 in. (76.2 cm) wide x 18.5 in. (46.99 cm) high x 17.7 in (44.96 cm) deep
Outside Dimensions: 31 in. (78.74 cm) wide x 21 in. (53.34 cm) high x 20 in. (50.8 cm) deep
more info
ISOLATION CUBICLE, WIDE (ID: 28.5" W X 16.2" D X 17" H) WITH HIGH ATTENUATION LINER
ISOLATION CUBICLE, WIDE (ID: 28.5" W X 16.2" D X 17" H) WITH HIGH ATTENUATION LINER
Contact our Behavioral Research Specialists for more information

The H10-24A has the same high density walls as the H10-24, with an extra inner lining of three layer LAG decoupling foam. This foam gives the A-model superior sound attenuation for the most demanding stimulus presentation or vocal response recording acoustical studies. The 3-layer LAG coupling provides a foam layer between the outer wall and the center high-mass, flexible-sheet layer. The inner foam layer provides absorption qualities for sounds generated or reflected inside of the cubicle. The cubicles are of sufficient size to hold a cage or hub with a full complement of stimulus-response modules and feeders. They will hold the longest modules (feeders and retractable levers or a nest/retreat box) on both end walls or a running wheel on one end of a rat test cage. It will also hold an octagon hub with feeders and retractable levers. The cubicle has two environment connection boards, ECBs, on the back wall for connecting the S-R modules and the Linc control cables. There is an exhaust fan in the center of the rear wall. The fan is powered by 28 volts from the control interface.


Dimensions:
Inside Dimensions: 28.5 in. (72.39 cm) wide x 17 in. (43.18 cm) high x 16.2 in. (41.15 cm) deep
Outside Dimensions: 31 in. (78.74cm) wide x 21 in. (53.34 cm) high x 20 in. (50.8 cm) deep
more info
ISOLATION CUBICLE, LARGE (ID: 42" W X 30" D X 31.5" H)
ISOLATION CUBICLE, LARGE (ID: 42" W X 30" D X 31.5" H)
Contact our Behavioral Research Specialists for more information

The H10-24C is similar to the H10-24 standard isolation with very high-density, monolithic rigid foam walls except it is much larger than the H10-24 (39,690 cubic inches compared to 9,824 cubic inches in the H10-24). These cubicles are of sufficient size to hold a cage or hub with a full complement of stimulus-response modules and feeders. They will hold the longest modules (feeders and retractable levers or a nest/retreat box) on both end walls or a running wheel on one end of a rat test cage. It will also hold an octagon hub with feeders and retractable levers. The cubicle is equipped to mount up to two environment connection boards, ECBs, on the back wall for connecting the Stimulus and Response modules and the Habitest Linc control cables. There is an exhaust fan in the center of the rear wall. The fan is powered by 28 volts from the control interface.

Dimensions:
Inside Dimensions: 42 in. (106.68 cm) wide x 31.5 in (80.01 cm) high x 30 in. (76.2 cm) deep
Outside Dimensions: 43 in. (109.22 cm) wide x 33.37 in. (84.76 cm) high x 33.76 in. (85.75 cm) deep
more info
ISOLATION CUBICLE, TALL (ID: 23" W X 17.74" D X 24" H)
ISOLATION CUBICLE, TALL (ID: 23" W X 17.74" D X 24" H)
Contact our Behavioral Research Specialists for more information

The H10-24T is similar to the H10-24 standard isolation with very high-density, monolithic rigid foam walls except it is not as wide and is taller. These cubicles are typically used with systems where cameras need to be mounted on top of the cage. The additional height provides ample room to accommodate the camera mount. This cubicle is equipped to mount one environment connection board, ECB, on the back wall for connecting the Stimulus and Response modules and the Habitest Linc control cables. There is an exhaust fan in the center of the rear wall. The fan is powered by 28 volts from the control interface.

Dimensions:
Inside Dimensions: 23 in. (58.42 cm) wide x 24 in. (60.69 cm) high x 17.74 in. (45.06 cm) deep
Outside Dimensions: 24 in. (60.69 cm) wide x 25.725 in. (65.34 cm) high x 20.5 in. (52.07 cm) deep
more info
ISOLATION CUBICLE, TALL (ID: 21.5" W X 16.24" D X 22.5" H) WITH HIGH ATTENUATION LINER
ISOLATION CUBICLE, TALL (ID: 21.5" W X 16.24" D X 22.5" H) WITH HIGH ATTENUATION LINER
Contact our Behavioral Research Specialists for more information

This cubicle is identical to the H10-24T but includes an extra inner lining of three layer LAG decoupling foam. This foam gives the A-model superior sound attenuation for the most demanding stimulus presentation or vocal response recording acoustical studies. The 3-layer LAG coupling provides a foam layer between the outer wall and the center high-mass, flexible-sheet layer. The inner foam layer provides absorption qualities for sounds generated or reflected inside of the cubicle. This cubicle is equipped to mount one environment connection board, ECB, on the back wall for connecting the Stimulus and Response modules and the Habitest Linc control cables. There is an exhaust fan in the center of the rear wall. The fan is powered by 28 volts from the control interface.

Dimensions:
Inside Dimensions: 21.5 in. (54.61 cm) wide x 22.5 in. (57.15 cm) high x 16.24 in. (41.25 cm) deep
Outside Dimensions: 24 in. (60.69 cm) wide x 25.725 in. (65.34 cm) high x 20.5 in. (52.07 cm) deep
more info
ISOLATION CUBICLE FOR TRUSCAN
ISOLATION CUBICLE FOR TRUSCAN
Contact our Behavioral Research Specialists for more information

Our latest cubicle design, the 10-24TS is specifically designed to accommodate the TruScan line or locomotor testing arenas, each cubicle features: Lock-in-place pull-out tray for easy top-loading of subjects. Counterweights adequate for well-equipped large arenas. Baffled A/C Powered Fan and Cable Access Port on rear wall. Small Viewing Hole on Door Inside


Dimensions:
Inside Dimensions: 25 in. (63.5 cm) wide x 22.33 in. (56.72 cm) high x 23.5 in. (59.69 cm) deep
Outside Dimensions: 26 in. (66.04 ) wide x 26 in. (66.04 cm) high x 26.76 in. (67.97 cm) deep
more info
ISOLATION CUBICLE FOR TRUSCAN 220V
ISOLATION CUBICLE FOR TRUSCAN 220V
Contact our Behavioral Research Specialists for more information

Our latest cubicle design, the 10-24TS is specifically designed to accommodate the TruScan line or locomotor testing arenas, each cubicle features: Lock-in-place pull-out tray for easy top-loading of subjects. Counterweights adequate for well-equipped large arenas. Baffled A/C Powered Fan and Cable Access Port on rear wall. Small Viewing Hole on Door Inside


Dimensions:
Inside Dimensions: 25 in. (63.5 cm) wide x 22.33 in. (56.72 cm) high x 23.5 in. (59.69 cm) deep
Outside Dimensions: 26 in. (66.04 ) wide x 26 in. (66.04 cm) high x 26.76 in. (67.97 cm) deep
more info