| |
|
Wide Isolation Cubicle
|
Product Number: H10-24
The Cubicles are designed to isolate the subject from distracting ambient light, sound and laboratory activity.
The H10-24 standard isolation model has very high-density, monolithic rigid foam walls.
The cubicles are of sufficient size to hold a cage or hub with a full complement of stimulus-response modules and feeders.
They will hold the longest modules (feeders and retractable levers or a nest/retreat box) on both end walls or a running wheel on one end of a rat test cage. It will also hold an octagon hub with feeders and retractable levers.
The cubicle has two environment connection boards, ECBs, on the back wall for connecting the S-R modules and the Linc control cables.
There is an exhaust fan in the center of the rear wall. The fan is powered by 28 volts from the control interface.
Specifications:
| Inside dimensions: |
| 28" W x 18" D x 19" H |
| Outside dimensions: |
| 31" W x 21" D x 21" H |
| Fan: |
| 28 VDC, 40 mA, 5.4 CFM air turnover |
|
|
| |
|
Wide Isolation Cubicle with Acoustical Liner
|
Product Number: H10-24A
The H10-24A has the same high density walls as the H10-24, with an extra inner lining of three layer LAG decoupling foam. This foam gives the A-model superior sound attenuation for the most demanding stimulus presentation or vocal response recording acoustical studies. The 3-layer LAG coupling provides a foam layer between the outer wall and the center high-mass, flexible-sheet layer. The inner foam layer provides absorption qualities for sounds generated or reflected inside of the cubicle.
The cubicles are of sufficient size to hold a cage or hub with a full complement of stimulus-response modules and feeders.
They will hold the longest modules (feeders and retractable levers or a nest/retreat box) on both end walls or a running wheel on one end of a rat test cage. It will also hold an octagon hub with feeders and retractable levers.
The cubicle has two environment connection boards, ECBs, on the back wall for connecting the S-R modules and the Linc control cables.
There is an exhaust fan in the center of the rear wall. The fan is powered by 28 volts from the control interface.
Specifications:
| Inside dimensions: |
| 26.5" W x 16.5" D x 17.5" H |
| Outside dimensions: |
| 31" W x 21" D x 21" H |
| Fan: |
| 28 VDC, 40 mA, 4 CFM air turnover |
|
|
| |
|
Isolation Cubicle
|
Product Number: H10-24B
28" W x 22.7" D x 18.5" H |
|
| |
|
Large Isolation Cubicle
|
Product Number: H10-24C
42" W x 30 " D x 33.4 " H |
|
| |
|
Tall Isolation Cubicle |
Product Number: H10-24T
23" W x 17.7" D x 24 " H |
|
| |
|
Tall Isolation Cubicle with Acoustical Liner
|
|
| |
|
Tru Scan Arena Isolation Cubicle
|
Product Number: H10-24TS
Our latest cubicle design, the 10-24TS is specifically designed to accommodate the TruScan line or locomotor testing arenas, each cubicle features:
- Lock-in-place pull-out tray for easy top-loading of subjects.
- Counterweights adequate for well-equipped large arenas.
- Baffled A/C Powered Fan and Cable Access Port on rear wall.
- Small Viewing Hole on Door
- Inside Dimensions: 23"D x 22"H x 25"W
- Outside Dimensions: 26"D x 25"H x 26"W
|
|
